5 hp VFD, Single Phase to Three Phase VFD
5hp variable frequency drive manufactured for addressing the trouble of not having 3 phase power at hand. Its rated current is 17amps, RS485 enabled, shipping weight 4kg.
SKU: GK3000-2S0037
5 hp single to three phase variable frequency drive features 17 amps rated current. It can convert 1-phase 220v (230v, 240v) home power supply to 3-phase power for better control of 3-phase motors.
Using our multi-horsepower VFDs (2hp, 7.5hp, 10hp, 15hp, 20hp, etc.) to run your 3 phase motor from single-phase power supply.
Product Parameters
| Basics | Model | GK3000-2S0037 |
| Capacity | 5 hp (3.7 kW) | |
| Shipping weight | 4 kg | |
| Dimension | 230*118*153 mm | |
| I/O Feature | Rated current | 17 A |
| Input voltage | 1 phase 220~240V AC | |
| Input frequency | 50Hz/ 60Hz | |
| Output voltage | 3 phase AC 0~input voltage | |
| Output frequency | 0.00~400.00Hz | |
| Over load capacity | 150% of rated current for 1 minute, 180% of rated current for 3 seconds | |
| Control Feature | Control mode | V/F control; Sensorless vector control; |
| Communication | RS485 | |
| Speed regulation | 1:100 | |
| Start torque | 150% of rating torque at 1 Hz | |
| Speed control accuracy | ≤±0.5% of rating synchronous speed | |
| Frequency precision | Digital setting: max frequency x± 0.01%; Analog setting: max frequency x± 0.2% | |
| Frequency resolution | Analog setting: 0.1% of max frequency; Digital setting: 0.01Hz | |
| Torque boost | Automatic torque boost, manual torque boost 0.1%~30.0% | |
| Interior PID controller | Be convenient to make closed-loop system | |
| Automatic energy save running | Optimize V/F curve automatically based on the load to realize power save running | |
| Automatic voltage regulation (AVR) | Can keep constant output voltage when power source voltage varies. | |
| Automatic current limiting | Limit running current automatically to avoid frequent over-current which will cause trip | |
| Environment | Enclosure rating | IP 20 |
| Temperature | –10℃~ +40℃; VFD will be derated if ambient temperature exceed 40℃; each rise 1℃, the derate will be 5% | |
| Humidity | 5%-95%, without condensation | |
| Altitude | ≤1000m; VFD will be derated if above 1000m | |
| Impingement and oscillation | Normal running:<5.9m/s2 (0.6g); Transportation:<15m/s2 (1.5g) | |
| Store environment | –20℃~ +60℃; no dust, no corrosive gas, no direct sunlight |
Tips: Variable frequency drive application in rotary sushi and rotary hotpot
Rotary Sushi is a kind of food that can be directly taken from the seat, which is more convenient than ordinary buffet. Diners can continue to get direct stimuli and continue to consume. The food display is on-site, and is tightly bound to the consumption process, and the consumer purchase decision-making cost is the lowest. In the whole process of eating, rotary food conveyor belt is an important part to ensure food lively and continuous offering. If there is large sum of customers, the food transporting speed should be slightly faster; in the opposite, it can be slightly slower. VFD has wide speed regulation range, high precision, starts smooth, small size, low noise, long life and other characteristics, and has been widely used in rotary sushi conveyor belt, rotary hotpot conveyor belt and other transport equipments in catering industry.
VFD transformation effect:
- Smoothly start and stop, preventing food falling.
- Can achieve stepless speed adjusting, wide range of speed, according to the number of customer to adjust transporting speed.
- Better protection to motor.
- Save energy, the rate of power saving can be more than 50%.
- Can positive and negative rotate, and easy to switch.