single phase to 3 phase converter

15 hp Single Phase to 3 Phase Converter

15 hp static phase converter output frequency 50Hz or 60Hz, with LCD, LED display. The input voltage can choose 110V, 120V, 230V, 440v or 480V, ouput voltage can select 220V, 400V, 440V and 480V.


15 hp (12 kW) static phase converter can be used at output voltages of 220V, 380V, 400V, 415, 440 or 480V, with LCD, LED display, input and output frequency 50/60Hz. Super cost-effective and easy to operate.
More models from ATO will offer the best value for your electrical projects including 4hp, 5hp, 7.5hp, 25hp, and 30hp.

Note: When the load is a motor, the phase converter should be more than 3 times the motor capacity.

Product Parameters

Power12 kW
Circuit ModeIPM module, SVPWM modulation
Output WaveformStandard pure sine wave
Wide Voltage Input80-320V AC (can customization)
Input VoltageOptional: 110V/ 120V/ 220V/ 230V/ 240V/ 380V/ 415V/ 440V/ 480V single phase 2 wire
Input Current36.9A at 230V (Input Current=Power/Input Voltage/1.414)
Output VoltageOptional: 220V/ 380V/ 400V/ 415V/ 440V/ 480V 3 phase 4 wire+PE
Output Current17.3A at 400V
Input Frequency50Hz/ 60Hz
Output Frequency50Hz/ 60Hz
Startup Mode SelectionStable frequency step-down start or frequency start  (can be selected on the LCD screen settings)
Frequency Stability≤0.01%
Load Regulation≤3%
THD≤2% (Linear load)
Phase Angle120°±1°
Crest Factor Ratio3:1
LCD DisplayOutput voltage, output current, output frequency, output power, fault code, time temperature, startup mode selection, setting parameters
ProtectionInput under voltage, overvoltage, output over-current, short circuit, overheating etc.
Protective Reaction Time≤2ms
Machine Efficiency≥94%
Insulation Properties1800V AC/ 10mA/1 min
Insulation Impedance500V DC/ 50MΩ
Cooling MethodForced air cooling
Noise1m> 60dB
Ambient Temperature-25℃~+55℃
Humidity0~95% (No condensation)


Product Features

Scroll to Top