40hp Rotary Phase Converter, 240V
SKU: ATO-AMEY-ADX40
This phase converter can convert 1 to 3 phase power and provide 100% power for 208-250v equipment.
The ADX series phase converters have current control to provide consistent torque while starting high inertia, extremely hard starting loads, yet are precise enough for CNC applications.
Best for: High Inertia/friction loads such as pumps, fans, compressors, blowers, dust collectors and fly wheels.
Features
- Modular & Expandable
- VIT Generator
- Full Current Latching Starter
- 3 Phase Breaker and Receptacle Slots
- MicroSmart Digital Industrial Programmable Controller
Our rotary phase converters are also available in other power options such as 5hp, 10hp, 15hp, 20hp, 30hp, etc.
General Specifications
| Single motor start max. (HP) | 20 |
| CNC/VFD (HP) | 20 |
| Resistive/Oven (amps) | 52 |
| Rectified/Welder (amps) | 52 |
| kW of Generator (based on FLA) | 29.8 |
| Idler/Generator FLA | 100 |
| Frequency (Hz) | 60 |
| Generator Type | GENTEC/Variable Impendence |
| Magnetic Starter | Included (remote start ready) |
| Panel Enclosure | NEMA 1 |
| Temperature Rating | 40 C Ambient |
| Wave Form | Pure Sinusoidal Analog |
| Phase Angle | 120 degrees |
| Efficency | 0.97 |
Three Phase Output Specifications (continuous)
| Output Voltage | Equals input voltage |
| Voltage Tolerance | Meets IEEE Std 241-1990 utility |
| 3-Phase Output Configuration | 3-Wire Delta |
| Service Factor | 1.5 |
| Output Frequency (Hz) | Input Frequency |